Alla produkter

GX-241 LH – A super compact Liquid Handler

A super compact Liquid Handler

Beskrivning

Ideally suited for applications and labs were bench space is at a premium, the GX-241 Liquid Handler features a large injection volume range of 20 µL to 5 mL using a minimal deal volume direct injection design. The GX-241 also features two transfer ports for delivering sample to off-bed detection devices in Flow Injection Application (FIA). This two rack capacity liquid handler has the ability to hold hundreds of samples ranging from 2 mL vials to 100mm test tubes. The flexible platform can also hold up to 4 standard or deep well 96 well microplates.

FEATURES:
-Compact Footprint with 2 Rack Capacity (see Gilson Liquid Handler Footpring Comparison to the right)
-Direct Injection Module
-New Compact GX Syringe Pump
-TwoTransfer Pots for Delivering Liquids to Off-Bed Devices
-2-Character Digital LED Display
+ I/O Input and Output

BENEFITS:
Functional Capacity in a small amount of space that can accommodate up to 4 shallow or deep well plates

Direct Injection port delivers sample directly to the valve with minimal dead volume and no connecting tubing, reducing carryover/contamination and plugging potential

Compact GX-Syringe Pump – Syringe volumes: 100 µL – 10 mL
Perform Flow Injection Analysis to conductivity, fluorescence, colorimter, and absorbance detectors

Display provides error codes and gives user indication of maintenance requirements
Allows connectivity to third-party devices

Technical info

Sampler Type Small Footprint X/Y/Z with stationary rack design
Probe Positioning Performance
Accuracy +/- 0.75 mm in X/Y/Z dim.
Repeatability +/- 0.20 mm in X/Y/ dim.
Arm Speed 0-350 mm/sec (300 mm/sec default) in X and Y dimensions 0-150 mm/sec (125 mm/sec default) in Z dimension
Horizontal Motion Strength 0.3 kg (0.7 lbs)
Vertical Punch Strength 1.8 kg (4 lbs)
Probe Rinse Probe rinsing occurs through a dedicated rinse station with static and flowing rinse capabilities
Number of Racks Two Code 33X-series (short) or Code 34X-series (short) or one of each
Front Panel Two digit display and indicator lights for Power and Error
Contact Control Four inputs (contact closure, TTL), two relay outputs, and two switched +24V DC 1A outputs Switching voltages higher than 30V or greater than 1 Amp of current may damage the instrument
Communication Ethernet Software Control Computer control via Ethernet and TRILUTION® LH Software Environmental Condition Indoor Use Only
Alltitude Up to 2000m
Temperature range 5º – 40ºC
Humidity Maximum relative humidity 80% for temperatures up to 31ºC, decreasing linearly to 50% relative humidity at 40ºC
Safety and Compliance The liquid handler has been certified to safety standards required in Canada (UL), Europe, and the United States (CE & RoHS). Refer to the instrument rear panel label and the Declaration of Conformity document for the current standards to which the instrument has been tested.
Power Requirements Voltage 24V DC
Current rating 2.0A
Power SupplyVoltage 24V DC
Current rating 6.25 Amp, 150 Watts
Dimensions (W x D x H) *with Z-Arm installed and connected 39 x 50 x 47 mc (15.4 x 19.8 x 18.5 in)

Teknisk information:

Har du frågor om våra produkter? Vi hjälper gärna till!

08-92 00 09 • sales@pretech.nu